Modulo Sensor Temperatura Remoto Infrarrojo Mlx90614 Sparkfun Itytarg

The IR Thermometer Evaluation Board is equipped with an MLX90614-ABB -- a simple-to-use, but very powerful single-zone infrared thermometer, capable of sensing object temperatures between -70 and 380°C. Using SMBus -- an I2C-like interface -- to communicate with the chip means you only need to devote two wires from your microcontroller to interface with it.

Manufacturer SparkFun Electronics
Sensor Type Temperature
Sensing Range -
Interface SMBus (2-Wire/I²C)
Sensitivity -
Voltage - Supply 3.3V
Embedded Yes, MCU, 8-Bit
Supplied Contents Board(s)
Utilized IC / Part MLX90614

This is an evaluation board for the MLX90614 IR Thermometer. The sensor is connected to an ATmega328 running at 3.3V with a STK500 (Arduino) 8MHz bootloader. Code can be loaded through the FTDI basic interface and the Arduino environment.

The MLX9061 sensor is a high precision, small size, single zone IR thermometer with an optional SMBus (two-wire) or PWM interface. The ATMega328 comes with demo code that gives a temperature readout in degrees F at 38400bps. You can use a 3.3V FTDI Basic to connect to the board.

• ATMega328 w/ 8MHz STK500 (Arduino) bootloader
• MLX90614 IR sensor, 3V version
• Power and status LEDs

Tutorial

https://learn.sparkfun.com/tutorials/mlx90614-ir-thermometer-hookup-guide#mlx90614-overview