Optoacoplador Analogico Lineal Fotovoltaico Hcnr200 Itytarg

Cantidad de canales 1
Voltaje - Aislamiento 5000Vrms
Relación de transferencia de corriente (mín.) 0.25% a 10mA
Relación de transferencia de corriente (máx.) 0.75% a 10mA
Tiempo de encendido/apagado (Típ.) -
Tiempo de subida/bajada -
Tipo de entrada CC
Tipo de salida Fotovoltaico, linearizado
Voltaje - Salida (máx.) -
Corriente - Salida / Canal -
Voltaje directo (Vf) típico 1.6V
Corriente continua - Directa (If) 25mA
Vce de saturación (máx.) -
Temperatura de operación -55°C ~ 100°C
Tipo de montaje Orificio pasante
Paquete / Caja (carcasa) 8-DIP (0.400", 10.16mm)
Paquete del dispositivo del proveedor 8-DIP

The HCNR200 high-linearity analog optocoupler consists of a high-performance AlGaAs LED that illuminates two closely matched photodiodes. The input photodiode can be used to monitor, and therefore stabilize, the light output of the LED. As a result, the nonlinearity and drift characteristics of the LED can be virtually eliminated. The output photodiode produces a photocurrent that is linearly related to the light output of the LED. The close matching of the photodiode and advanced design of the package ensure the high linearity and stable gain characteristics of the optocoupler.

The HCNR200 can be used to isolate analog signals in a wide variety of applications that require good stability, linearity, bandwidth and low cost. The HCNR200 is very flexible and, by appropriate design of the application circuit, is capable of operating in many different modes, including: unipolar/bipolar, AC/DC and inverting/non-inverting. The HCNR200 is an excellent solution for many analog isolation problems.

Features
Low Nonlinearity: 0.01%
K3 (IPD2/IPD1) Transfer Gain: /-15%
Low Gain Temperature Coefficient: -65 ppm/ degrees C
Wide Bandwidth - DC to > 1 MHz
Worldwide Safety Approval:
UL 1577 Recognized (5 kV rms/1 min Rating)
CSA Approved
IEC/EN/DIN EN 60747-5-2 Approved VIORM = 1414 V peak (Option 050)
Surface Mount Option Available (Option 300)
8-Pin DIP Package - 0.400" Spacing
Allows Flexible Circuit Design
Special Selection for HCNR201: Tighter K1, K3 and Lower Nonlinearity Available
Options available are:
060 = IEC/EN/DIN/EN 60747-5-2 VIORM = 1414 V peak Option
300 = Gull Wing Surface Mount Lead Option
500 = Tape/Reel Package Option (1 k min.)
XXXE = Lead Free Option

Applications
Low Cost Analog Isolation
Telecom: Modem, PBX
Industrial Process Control:
Transducer Isolater
Isolater for Thermocouplers
4 mA to 20 mA Loop Isolation
SMPS Feedback Loop, SMPS Feedforward
Monitor Motor Supply Voltage
Medical