Interfaz Modbus Rtu Rs485 1ch Rele Alim. 7-24v Itytarg

IMPORTANTE: PARA LA OPERACIÓN DE ESTE MODULO SE REQUIEREN CONOCIMIENTOS SOBRE EL PROTOCOLO DE COMUNICACION MODBUS. NO SE BRINDA NINGUN TIPO DE ASISTENCIA TECNICA SOBRE SU FUNCIONAMIENTO. LA INFORMACION TECNICA DETALLADA LA DEBERA BUSCAR EL COMPRADOR POR SU CUENTA EN INTERNET.

Product parameters:
 
1. Onboard mature and stable 8bit MCU and MAX485 level conversion chip

2. Communication protocol: support standard Modbus RTU protocol

3. Communication interface: support RS485/TTL UART interface

4. Communication baud rate: 4800/9600/19200, default 9600bps, support power-off save

5. Optocoupler input signal range: DC3.3-30V (this input cannot be used for relay control)

6. Output signal: relay switch signal, support manual, flash off, flash off mode, flash off/flash

The base number of the time delay is 0.1S, and the maximum flash-off/flash-off time can be set as
0xFFFF*0.1S=65535*0.1S=6553.5S

7. Device address: range 1-255, default 255, support power-off save

8. Onboard 1 way 5V, 10A/250V AC 10A/30V DC relay, can suck continuously
100,000 times, with diode effusion protection, short response time

9. On-board relay switch indicator

10.Supply voltage: DC7-24V, with input anti-reverse connection protection