¡Disponible sólo en Internet!
09626
Nuevo producto
10 Elemento artículos
Advertencia: ¡Últimos artículos en stock!
Disponible el:
compartir
Function Omnipolar Switch
Technology Hall Effect
Polarization Either
Sensing Range ±11mT Trip, ±9.5mT Release
Test Condition -40°C ~ 85°C
Voltage - Supply 2.2V ~ 5.5V
Current - Supply (Max) 3µA
Current - Output (Max) 5mA
Output Type Push-Pull
Features -
Operating Temperature -40°C ~ 85°C (TA)
Package / Case TO-236-3, SC-59, SOT-23-3
Supplier Device Package SOT-23-3
Micropower Omnipolar Digital
Hall-effect Sensor ICs
Micropower Omnipolar Digital Hall-effect Sensor ICs, SL353 Series, are small, and versatile, digital Hall-effect devices
operated by the magnetic field from a permanent magnet or an electromagnet. These sensitive devices are designed
to meet a wide range of potential applications with low power requirements including battery-operated equipment.
The SL353 Series devices respond to either a North or South Pole, meaning that they do not require the magnet
polarity to be identified, providing an easier installation and potentially reducing system cost.
These low-power sensing devices use BiCMOS (Bipolar Complementary Metal Oxide Semiconductor) technology and
a timing circuit that turns the power on for only a short time – it is off for the rest of the period (duty cycle) – significantly
reducing the average current consumption.
Micropower omnipolar digital Hall-effect sensor ICs can operate from a supply voltage as low as 2.2 V, promoting
energy efficiency.
The push-pull output does not require a pull-up resistor and can operate with very low current levels, potentially helping
to reduce cost and minimizing the total current consumption.
The SL353 Series is available in two duty cycle configurations to accommodate a variety of application needs:
• SL353HT: High duty cycle (13 % typ.) for applications requiring high switching speed and a lower current
(0.33 mA typ.) than standard Hall-effect sensor ICs.
• SL353LT: Very low duty cycle (0.013 % typ.) resulting in extended battery life in applications requiring extremely
low current drain (1.8 µA typ.) and not requiring a high switching speed.
The SL353 Series has a typical operating point of ±60 Gauss at 25 °C [77 °F].
These sensors are available in a subminiature SOT-23 surface mount package on tape and reel (3000 units per reel),
for use in automated pick-and-place component installation.