¡Disponible sólo en Internet!

Arduino Pro Micro Atmega32u4 5 V/16 Mhz Micro Usb Itytarg

MLA643426511

Nuevo producto

Cod: GAW / HJG-A159

Más detalles

1 Elemento

Advertencia: ¡Últimos artículos en stock!

compartir

$ 26.450,00 IVA Inc.

Más

El Pro Micro es similar al arduino Mini Pro excepto con un ATMEGA32U4 a bordo. Este chip hace la gran diferencia ya que ademas puede ser utilizado como dispositivo de interfaz humana. El transceptor USB dentro del 32U4 nos permite añadir conectividad USB a bordo y acabar con voluminosos interfaz USB externo. Esta pequeña tarjeta hace todas las funciones Arduino con las que se está familiarizado con: 4 canales de 10-bit ADC, 5 pines PWM, 12 DIO, así como hardware conexiones serie Rx y Tx. Funcionando a 16 MHz y 5 V. Este pequeño microcontrolador puede ir en cualquier lugar. Hay un regulador de tensión a bordo para que pueda aceptar una tensión de hasta 12V.

  • 12 Pines digitales I/O (5 PWM)
  • 4 Pines de entrada analógicos (10 bit c/u)
  • Tensión de entrada 5-12V  (Posee regulador interno)
  • Tensión de salida: 5v
  • Corriente máxima de salida total 150mA
  • ATMega 32U4 funcionando a 5V/16MHz
  • Apoyado bajo Arduino IDE v1.0.1
  • Conector micro-USB para la programación
  • 4 pines x ADC de 10 bits
  • Rx y Tx Hardware Conexiones en serie
  • 12 salidas/entradas digitales de las cuales 5 pueden ser PWM.
  • Dimensiones: 3.31cm X 1.78 c

Features:
ATMEGA32U4 in 5 v / 16 MHZ
The board of directors on the micro USB interface programming
Four 10 bit ADC pin
12 digital I/O (PWM)
Rx and Tx hardware serial connection

Description:
This small board to do all in the neighbourhood of the Arduino skills: 4 channel 10 bit ADC, five PWM pin, 12 DIO and hardware serial connection Rx and Tx: are you familiar with.Run in 16 MHZ and 5 v, the committee will remind you of many other you like the Arduino compatible circuit board, but this little guy can go to any place.In the ship has a voltage regulator, so it can accept voltage up to 12 VDC.If you are the supply of unstable power supply board, must be connected to the "RAW" is not the VCC pin.This latest version correct silk, make the pin 14 is correct.We also added a PTC fuse and diode protection power supply circuit and correct RX and TX LED circuit

PRODUCTO MARCA GENERICA

30 productos más en la misma categoría: