• El módulo controlador de humedad de temperatura adopta un chip de grado industrial y un panel de pantalla LCD de alta precisión, para que pueda controlar perfectamente la temperatura y la humedad y mostrar claramente los dígitos. Además, el paquete incluye sensor de humedad y temperatura SHT20 de alta precisión.
• Función de temperatura: De acuerdo con la temperatura de inicio o la temperatura de parada, el controlador de temperatura reconoce su modo de trabajo; Hay un modo de enfriamiento y un modo de calentamiento: cuando la temperatura inicial es mayor que la temperatura de parada, es el modo de enfriamiento "C"; Cuando la temperatura inicial es más baja que la temperatura de parada, es el modo de calefacción "H".
• Función de humedad: El método para reconocer el modo de trabajo es el mismo que el método de función temporal. Hay dos modos de trabajo que son el modo de deshumidificación y el modo de humidificación: cuando la temperatura inicial es mayor que la temperatura de parada, es el modo de deshumidificación "D"; Cuando la temperatura inicial es inferior a la temperatura de parada, es el modo de humidificación.
• Otras funciones: El módulo del controlador de humedad de temperatura puede leer y configurar parámetros de manera remota, y tiene la función de informar en tiempo real de la temperatura / humedad y las funciones de habilitación de relé.

Parámetros:
Nombre del producto: Módulo de control de temperatura y humedad.
Rango de temperatura: -20 ° C ~ 60 ° C
Rango de humedad: 00% ~ 100% RH
Precisión de control: 0.1 ° C, 0.1% RH
Sonda de detección: sensor integrado
Tipo de salida: salida de relé
Capacidad de salida: máximo 10A
Dimensión: 57 * 60 * 20mm

Description:
XY-TR01 Temperature and humidity control module high precision digital display word double output automatic constant temperature and humidity control panel.
Product adopts industrial-grade chip, high-precision SHT20 temperature and humidity sensor.

Features:
1>. Support UART;
2>. LCD high definition display;
3>. Support measurement temperature and humidity at the same time;
4>. Support Micro USB input;
5>. Working mode is automatically adjusted;
6>. High precision detection.

Parameters:
1>. Product name: Humidity Temperature Controller;
2>. Model: XY-TR01;
3>. Temperature range: -20℃~60℃;
4>. Humidity range: 0%-100%RH;
5>. Control precision: 0.1℃ & 0.1%RH;
6>. Output type: Relay output;
7>. Rated load: 10A(MAX);
8>. Size of Controller: 60*58*22mm
9>. Size of Sensor probe: 60*30*20mm
10>. Length of Sensor cable: 1meter

Temperature Function:
1>. Automatic recognition of working mode:
The module automatically selects the working mode according to the Start Temperature and Stop Temperature.
Start Temperature is more than stop temperature, Turn ON cooling mode 'C'.
Start temperature is less than stop temperature, Turn ON heating mode 'H'.
2>. Cooling Mode 'C':
Relay turn ON and Red Indicator turn ON and Refrigeration equipment starts working if connect load when Current Temperature is more than Start Temperature.
Relay turn OFF and Red Indicator turn OFF and Refrigeration equipment stops working if connect load when Current Temperature is less than Stop Temperature.
3>. Heating mode 'H':
Relay turn ON and Red Indicator turn ON and Heating equipment starts working if connect load when Current Temperature is less than Start Temperature.
Relay turn OFF and Red Indicator turn OFF and Heating equipment stops working if connect load when Current Temperature is more than Stop Temperature.
4>. Temperature Correction ‘ OFE ’(-10.0~10.0℃):
The system may have errors if it works for a long time, it can be corrected by this function.
Actual Temperature = Measured Temperature + Calibration Value.
Setting method:
4.1>.Double-click button 'TM+' in the normal running interface into Temperature Correction setting interface.The first line shows the type of correction value(OFE or RH).The second line shows the specific value.
4.2>.Switch to select modified parameters by short press button ‘TM-’.
4.3>.Short press button ‘RH+’ and ‘RH-’ to set the specific value.Support long press.
4.4>.After the parameters have been modified, double-click button ‘TM+’ to save the data and exit the correction value setting interface.
5>. Set Start/Stop Temperature:
Keep press button 'TM+' for 3second in the normal running interface into Start Temperature setting interface.Short press button 'TM+' or 'TM-' to set parameters value.After the parameters are modified and then wait for 6s to automatically save and exit.
Keep press button 'TM-' for 3second in the normal running interface into Stop Temperature setting interface.Short press button 'TM+' or 'TM-' to set parameters value.After the parameters are modified and then wait for 6s to automatically save and exit.
6>. Relay enable (default on):
Short press button ‘TM-’ in the normal running interface.Turn ON or OFF temperature relay output enable.Screen will display ‘℃’ and flashes if If the temperature relay is OFF.

Humidity Function:
1>. Automatic recognition of working mode:
The module automatically selects the working mode according to the Start Humidity and Stop Humidity.
Start Humidity is more than stop Humidity, Turn ON dehumidification mode 'd'.
Start Humidity is less than stop Humidity, Turn ON humidification mode 'E'.
2>. Dehumidification Mode 'd':
Relay turn ON and Green Indicator turn ON and Dehumidification equipment starts working if connect load when Current Humidity is more than Start Humidity.
Relay turn OFF and RED Indicator turn OFF and Dehumidification equipment stops working if connect load when Current Humidity is less than Stop Humidity.
3>. Humidification mode 'E':
Relay turn ON and Green Indicator turn ON and Humidification equipment starts working if connect load when Current Humidity is less than Start Humidity.
Relay turn OFF and Green Indicator turn OFF and Humidification equipment stops working if connect load when Current Humidity is more than Stop Humidity.
4>.Humidity Correction ‘ RH ’(-10.0~10.0%RH):
The system may have errors if it works for a long time, it can be corrected by this function.
Actual Humidity= Measured Humidity+ Calibration Value.
4.1>.Double-click button 'TM+' in the normal running interface into Temperature Correction setting interface.The first line shows the type of correction value(OFE or RH).The second line shows the specific value.
4.2>.Switch to select modified parameters by short press button ‘TM-’.
4.3>.Short press button ‘RH+’ and ‘RH-’ to set the specific value.Support long press.
4.4>.After the parameters have been modified, double-click button ‘TM+’ to save the data and exit the correction value setting interface.
5>.Set Start/Stop Humidity:
Keep press button 'RH+' for 3second in the normal running interface into Start Humidity setting interface.Short press button 'RH+' or 'RH-' to set parameters value.After the parameters are modified and then wait for 6s to automatically save and exit.
Keep press button 'RH-' for 3second in the normal running interface into Stop Humidity setting interface.Short press button 'RH+' or 'RH-' to set parameters value.After the parameters are modified and then wait for 6s to automatically save and exit.
6>.Relay enable (default on):
Short press button ‘RH-’ in the normal running interface.Turn ON or OFF humidity relay output enable.Screen will display ‘%’ and flashes if If the temperature relay is OFF.

Using Steps:
1>. Connect sensor to controller;
2>. Connect to power supply to controller;
3>. Adjust Start Temperature, Stop temperature and Temperature Correction;
4>. Adjust Start Humidity, Stop Humidity and Humidity Correction;
5>. Enable relay output according requirement;
6>. Remove power supply;
7>. Connect to load with power supply at relay output terminal if need at Step5;
8>. Connect to power supply for controller again;
9>. Test and working!

Additional Features:
1>. Set or read data by UART.
Parameters such as start temperature/humidity, stop temperature/humidity, temperature/humidity correction, etc. can be set through the UART.
2>. Temperature/Humidity real-time reporting.
The controller module will report the current temperature/humidity to the terminal equipment by the UART at intervals of 1 second to facilitate data acquisition if the temperature/humidity reporting function is turned ON.
3>. Relay enable (default on).
If the relay enable is turned off, the relay remains off.
That is, the output state will never change, no matter what the measured temperature/humidity is.


UART Communication and Parameter Settings:
The system supports UART data upload and parameter setting functions (TTL level);
UART: 9600, 8, 1

Temperature and humidity data upload format:
Temperature format: work mode (H/C), Current Temperature, Temperature relay status;
Humidity format: work mode (E/D), Current Humidity, Humidity relay status;
For example:
H, 20.5℃, CL: Heating Mode, Current Temperature 20.5℃, Temperature relay is OFF.
D, 50.4%,OP: Dehumidification mode, Current Humidity 50.4%RH, Humidity relay is ON.

Application:
1>. Control cabinet;
2>. Production workshop;
3>. Hatching aquaculture control;
4>. Tobacco industry;
5>. Printing house;
6>. Aquarium temperature control;
7>. Bedroom.