Deteccion Obstaculos Laser 0-1metro Robotica Itytarg

Type: laser diffuse reflection
Mode!: XLUG100CM
* Suitable for Freescale intelligent car tracking
Detection range: 0-1m
Line length: 25cm
Light emitting mode: direct stream light
Detection method: diffuse reflection type
Working voltage: 5V 12V 24V 36V
Operating mode: high level when shading (switchable)
Standard detection: object opaque body (above 2*0.8mm)
* The difference should be less than 0.025mm
* 6MM laser wavelength of the emitting tube is 650NM
* Indicator lights up when entering light (red)
Consumption current: below 30mA
Control output (output format) : NPN open collector output
Contro! output (load power supply voltage) : DC5“36V
Control! output (load current) : below 50mA
Control! output (residual voltage) : below 1.3V (load current 50mA)

Response frequency: above 1KHz (mean 3KHz)

* F1154_EE - SX47_67_C. JPG
Fluorescent lamp with luminance: below 1000Ix
+ Light use range anti-interference performance strong sunlight can be used
Ambient temperature range: -25°55°C
Storage: -30°80°C
(no icing, condensation)
Ambient humidity range for use: 5“85%RH
Save time: 5°95%RH (no icing, condensation)
* Vibration resistance (durability)20°2000Hz, peak acceleration 100m/s**2, double amplitude 1.5mm X, Y, Z directions 2h(4min cycle)
* Impact resistance (durability)500m/s**2 X, Y, Z direction 3 times
+ Protection class (IEC60529)IP50
Emission: Red=5VCC Black=GND
Receive: Red=5VCC Black=GND White=OUT(NPN)
Do not connect the positive and negative poles of the power supply in reverse!