Placa Desarrollo Stm32g030f6p6 32 Bits Cortex-m0 48 Mhz Arm Itytarg

Product introduction

This product is an ARM-Cortex-M0+ core board based on STM32G030F6P6 chip.
1. The core board provides the most basic circuit for the normal operation of ST
M32G030F6P6 chip, including external high-speed crystal oscillator (8MHz) cir
cuit, power management circuit (AMS1117-3.3), debugging interface (SWD mod
¢), Boot selection circuit, etc.

2. This core board provides all I/O port resources close to all available port res
cources, reset I/O port resources, BOOT select port resources, etc.;
3. The core board provides a power monitoring LED(PWR_LED) and a chip oper
ation indicator light (PC6 pin in STM32G030F6P6 control, such as pin shortag
@ need to use PCE pin, PA15_LED disconnected);

4, Power Supply Mode:

- You can choose to supply power through the USB-Micro interface on the core board:

| The commissioning equipment is connected to the SWD interface for power s
upply (2.7V-3.6V);

through the external power access to the screen printing 5V corresponding p
ort (5V-12V);

- It is not recommended to use a variety of power supply modes at the same ti
me. Cross power supply is easy to cause short circuit of the core board or the debugger to burn out

- In order to save the core board volume, the core board provides SWD progra
m download/debug interface, support JLink, ST-Link, DAPLINK and other comm
only used debugger SW mode for debugging and program download:

- The core board provides a reset button, which is convenient for users to rese
+t easily during the debugging of the equipment (in addition, the reset pin is also
introduced, the core board screen printing layer "R’ corresponding pin)

- The core advantage of the core board is to provide users with rapid project d
eployment requirements and as much as possible internal resources of the chip,
‘so we did not add any module and use in the core board may not be used by users.