Step Up 250w 9-48v A 10-50v 10a Max Led Driver Cc Base Metalica Itytarg

MLA769747600

Nuevo producto

Peso: 60g

Cod: HJG-A333

Más detalles

4 artículos

compartir

$ 18.600,00 IVA Inc.

Más

Product Description

Power imported power management chip design, high reliability, surge current small size (length width 36MM * 70MM * High 13MM) up to 96% efficiency, maximum power 250W.
At the same aluminum plate design and easy installation, the back panel can be directly attached to the flat metal cooling.
Reducing equipment space.Input voltage: DC8.5V-48V,Constant Range: 0.2-8A,Operating frequency: 150KHz
Voltage regulation resistance is 10K, current regulation is to 4.7K
Module properties: non-isolated step-up module (BOOST)

Feature:
Input current: 10A (MAX) exceeds 8A please enhance heat dissipation
Quiescent current: 10mA (12V liter 20V, the output voltage is higher Shizuta current will increase)
Output voltage: 10-50V continuously adjustable
12-80V fixed output (for volume customers)
Output current: 10A MAX exceed 6A please enhance heat dissipation (input output related to pressure, the greater the pressure the smaller the output current)
Output= input voltage * 10A, such as: input 12V * 5A = 60W, input 24V * 5A = 120W, Input 36V * 5A = 180W, input 48V * 5A = 240W
Conversion efficiency: up to 96% (efficiency of input and output voltage, current, pressure related) Overcurrent protection: Yes (input exceeds 13A, automatically reduce the output voltage, there is a range of errors.)

The output voltage/current adjustment method:
a) adjust RV1 potentiometer, according to your battery or LED, the output voltage is set to your desired voltage value. 10 LED string voltage regulator such as 37V.
b) adjust RV2 potentiometer clockwise 30 laps, the output current is set to a minimum, connected LED, adjust RV2 potentiometer to the desired current.
Used to the battery for charging, let the battery fully discharged, and then connect to output, you need to adjust RV2 current (for charging must use a battery completely discharged before being allowed to adjust, because the battery charge remaining in Vietnam more, the charging current is smaller.) Please do not adjust the current short-circuited manner, the circuit structure of the booster module can not be short-circuited by way of transfer.

27 productos más en la misma categoría: