Dy-hv8f Modulo De Sonido Grabacion Reproduccion Audio Itytarg

DY-HV8F is an intelligent voice module that can be used to play sound/music. Just upload the sounds that are be to played through USB, connect a suitable speaker to this module and you can start playing music/sound/voice files. All required operations can be performed over UART - select file, start / stop playback, increase / decrease volument, etc. Internal storage eliminated the need to add an external SD Card.

This module makes it easy to add sound playback functionality to microcontroller like - Arduino, ESP32, Raspberry Pi etc. The sound files can also be played independently, without the need for a microcontroller. The sould files can be played by passing digital IO signals to the specific pins (check datasheet for more info). Switches can be used to control the sound playback.

This module is great for playing audio files in voice assitants, GUI menus, greeting and alert messages, greeting cards, welcome messages, etc.

It allows I/O triggering, UART serial control and ONE_line single bus serial port control. Onboard 20W Class D amplifier circuit and can directly drive 4ohm 20W or 8ohm 10W speakers.

Support MP3, WAV decoding format. 

Note: We have the similar boards with support for reading external SD Cards. We also similar modules in different output power ratings. 

Features:

• Upload mp3 files to onboard storage through USB, request audio files and control playback through UART from a microcontroller
• Support MP3 and WAV decoding format. 8M bytes onboad flash to store audio files. Audio files can be uploaded over USB.
• Support sampling frequency (KHz) : 8/11.025/12/16/22.05/24/32/44.1/48.
• 24-bit DAC output, dynamic range support 90dB, SNR support 85dB.
• Supports FAT16/FAT32 file system, with the maximum support 32Gbit(4MByte) TF card and 32Gbit(4MByte) U-disk.
• Supports UART serial port control. It can control playback, pause, selections, turn up and down volume and other functions, the largest selection of 65535 songs. The baud rate is 9600 bit/s.
• Support I/O trigger function, 8bit I/O ports can trigger 8 musics or 8 I/O combinations to trigger 255 songs.
• Support One_line single bus serial port control, which can control playback, pause, selection, turn up and down volume and other functions.
• Support 3 configuration I/O for mode selection to make 7 work mode.
• Built in 20W Class D amplifier circuit and can directly drive 4ohm 20W or 8ohm 10W speakers.
• Work Voltage:DC 5V
• Working Temperature range:-20℃~85℃
• Working Humidity range:0%-95%RH6.Size :40*40*9mm

Package Includes:

• 1 x DY-HV8F 20W 5V Arduino MP3 Voice Playback Module