Modulo Rf Transceiver Mrf24j40 Zigbee Miwi 2.4 Ghz Itytarg

RF Family/Standard 802.15.4
Protocol Zigbee®
Modulation -
Frequency 2.4GHz
Data Rate 250kbps
Power - Output 0dBm
Sensitivity -94dBm
Serial Interfaces SPI
Antenna Type Integrated, Trace
Utilized IC / Part -
Memory Size -
Voltage - Supply 2.4V ~ 3.6V
Current - Receiving 19mA
Current - Transmitting 23mA
Mounting Type Surface Mount
Operating Temperature -40°C ~ 85°C
Package / Case Module

Features:
• IEEE Std. 802.15.4™ Compliant RF Transceiver
• Supports ZigBee®, MiWi™, MiWi™ P2P and
Proprietary Wireless Networking Protocols
• Small Size: 0.7” x 1.1” (17.8 mm x 27.9 mm),
Surface Mountable
• Integrated Crystal, Internal Voltage Regulator,
Matching Circuitry and PCB Antenna
• Easy Integration into Final Product – Minimize
Product Development, Quicker Time to Market
• Radio Regulation Certification for United States
(FCC), Canada (IC) and Europe (ETSI)
• Compatible with Microchip Microcontroller
Families (PIC16F, PIC18F, PIC24F/H, dsPIC33
and PIC32)
• Up to 400 ft. Range

Operational:
• Operating Voltage: 2.4-3.6V (3.3V typical)
• Temperature Range: -40°C to +85°C Industrial
• Simple, Four-Wire SPI Interface
• Low-Current Consumption:
- RX mode: 19 mA (typical)
- TX mode: 23 mA (typical)
- Sleep: 2 μA (typical)

RF/Analog Features:
• ISM Band 2.405-2.48 GHz Operation
• Data Rate: 250 kbps
• -94 dBm Typical Sensitivity with +5 dBm
Maximum Input Level
• +0 dBm Typical Output Power with
36 dB TX Power Control Range
• Integrated Low Phase Noise VCO, Frequency
Synthesizer and PLL Loop Filter
• Digital VCO and Filter Calibration
• Integrated RSSI ADC and I/Q DACs
• Integrated LDO
• High Receiver and RSSI Dynamic Range

MAC/Baseband Features:
• Hardware CSMA-CA Mechanism, Automatic ACK
Response and FCS Check
• Independent Beacon, Transmit and GTS FIFO
• Supports all CCA modes and RSS/LQI
• Automatic Packet Retransmit Capable
• Hardware Security Engine (AES-128) with CTR,
CCM and CBC-MAC modes
• Supports Encryption and Decryption for MAC
Sublayer and Upper Layer