Modulo Reloj Rtc Ds1302 Arduino Itytarg

Más

Este módulo de reloj en tiempo real está basado en tecnología de Dallas Semiconductors, es compatible con Arduino, y viene totalmente ensamblado y listo para funcionar.

Incluye una batería tipo CR2032 que provee un funcionamiento aproximado durante un periodo de 3 años, este módulo presenta una interfaz de comunicación de protocolo I2C, y posee detección de caída de voltaje y la función de interruptor de la batería.

NO INCLUYE BATERIA CR3022

ESPECIFICACIONES:

Referencia: RTC DS1302
Chip principal: DS1302
Voltaje de funcionamiento: 3.3V / 5V
Batería: CR2032 de litio
Interfaz: I2C
Señal de reloj: Para el microcontrolador (salida de 1Hz para microcontroladores en cascada)
Conexión: I2C
RAM para el almacenamiento de datos: 31 x 8
Tipo de interfaz : Serial interfaz I / O
Voltaje de operación: 2V ~5.5V
Temperatura de operación: 0°C ~ 70°C
Solo byte y transmisión multi- byte para el reloj o la memoria RAM de datos en lectura / escritura
TTL compatible: Si ( Vcc = 5V )
Pines de conexión directa; VCC, GND, CLK. DAT, RST
Tamaño: 5 cm x 2.1cm x 1.2cm
Peso: 7 gramos

Description:

The DS1302 is a trickle charge clock chip from DALLAS that contains a real-time clock / calendar and 31 bytes of static RAM to communicate with the microcontroller through a simple serial interface. Real-time clock / calendar circuit provides seconds, minutes, hours, days, weeks, months, years of information, the number of days per month and leap year number of days can be adjusted automatically. The clock operation can be determined by the AM / PM indication in a 24 or 12 hour format. (1) RST reset (2) I / O data lines (3) SCLK serial clock. (1) RST reset (2) I / O data lines (3) SCLK serial clock. Clock / RAM read / write data in a byte or up to 31 bytes of character group communication. DS1302 power consumption is very low to maintain data and clock information when the power is less than 1mW

Features:

real-time clock with 2100 can be calculated before the seconds, minutes, hours, days, weeks, months, years of ability, as well as leap year adjustment

31 8-bit temporary data storage RAM

Serial I / O port mode makes the pin count the least

Wide operating voltage 2.0V

working current 2.0V, less than 300nA

Read / write clock or RAM data, there are two transfer methods Single byte transfer and multi-byte transmission character group mode

8-pin DIP package or optional 8-pin SOIC package according to surface mount

simple

3-wire interface compatible with TTL Vcc = 5V

Optional industrial temperature range -40 +85

dual power supply for the main power supply and backup power supply

DS1302 real-time clock module parameters are as follows:

1.PCB for the single-panel, size: 44mm * 23mm * 1.6mm

2. With 4 positioning holes, diameter 3.1mm

3. Backup battery for the authentic celestial sphere CR2032, voltage 3V, current 260mAh, non-rechargeable battery. Theoretical data retention time greater than 10 years!

4. Crystal 32.768KHz, Japan imported crystal, matching capacitance of 6pF, size 2 * 6mm

5.DS1302 8-pin plug-in large chip made, the chip below IC Block, easy to replace and plug the chip

6. Module operating voltage is compatible with 3.3V / 5V, and 5V and 3.3V single-chip connection

7. Operating temperature: 0 ° --- 70 °