Adm00419 Modulo Breakout Mcp2210 Interfaz Usb A Spi Itytarg

Manufacturer Microchip Technology
Series -
Part Status Active
Type Interface
Function USB to SPI
Embedded No
Utilized IC / Part MCP2210
Primary Attributes Full Speed (12Mbps)
Supplied Contents Board(s), Cable(s)
Secondary Attributes USB Powered

The MCP2210 Breakout Module is a development and evaluation platform for the
MCP2210 device. The module is comprised of a single DIP form-factor board.
The MCP2210 Breakout Module has the following features:
• SPI bus signals (MOSI, MISO, SCK)
• Nine GP lines, configurable for GPIO, Chip Select or dedicated function operation
• Provides a user selectable (by using a jumper) power supply of 3.3V or 5V (up to
500 mA)
• DIP form-factor (0.6 inches overall row spacing between pins)
• PICkit™ Serial Analyzer header – used for SPI communication only
A Windows®-based PC software was created to help with the evaluation/demonstration
of the MCP2210 device as a USB-to-SPI (Master) device. It allows I/O control and
custom device configuration. The software is downloadable from the board web page
on www.microchip.com.
A DLL package is included to allow development of custom PC applications using the
MCP2210. The DLL package is also available for download on the board web page.

http://ww1.microchip.com/downloads/en/DeviceDoc/52056A.pdf